manualshive.com logo in svg

Western Digital caviar blue xl500s, Техническое справочное руководство

Поделиться
Скачать
Western Digital caviar blue xl500s Скачать руководство пользователя страница 9

XL500S

Description and Features

2679-701211-A06

RELEASED 10/21/10 (WD CONFIDENTIAL)

1

1.0

D

ESCRIPTION

 

AND

 F

EATURES

1.1

General Description

This WD SATA drive combines up to 16 MB cache and 6 Gb/s transfer rate for lightning-fast 
performance and cool, quiet operation. WD’s IntelliSeek™ technology calculates the optimum 
seek speeds to lower power consumption, noise and vibration. And to increase reliability, 
NoTouch™ parks the recording head off the drive surface during spin up, spin down and when 
the drive is off to ensure the head never touches the disk surface. These drives scored a 
perfect 5.9 on the Windows Experience Index and are Windows Vista™ certified.

These hard drives are your best choice for today’s powerful, information-hungry systems 
running Windows 2000 Advanced Server, Windows 2003 Server, Windows Vista, Windows 
XP, and Windows 2000 operating systems on Intel

®

 Itanium

®

, Xeon

™

 and Pentium

®

 4 as well 

as AMD processors.

WD’s rugged and reliable hard drives are designed and manufactured to the highest 
standards of quality and reliability. Built to last, this SATA hard drive is made for years of cool-
running, high-performance operation around the clock. Before shipping, every drive 
undergoes over 200 rigorous tests to ensure functionality and compatibility.

Содержание caviar blue xl500s




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды