Western Co 015829, Руководство пользователя

Страница: 11 / 16

WI1200-24 WI1200-48
User Manual
EN
3
6- RENEWABLE PLANT : if there is a plant of renewable energy production, connect the plant through a
dedicated charge controller on the battery terminals. ( WARNING: WI1200 inverter battery cables
should always be connected directly to the battery terminals!)
7- REMOTE ON / OFF: connect a remote on/off power switch to the dedicated connector with 2 poles
removing the series closure jumper. ( CAUTION: even the power switch must be set to ON or ENERGY
SAVING)
MEANINGS OF LED INDICATIONS
Pic.2 Front Panel
From the front panel of WI1200-24 and WI1200-48 inverter, you can make the switch on and off of the inverter,
you can also get reports about the working status and error:
Table of LED STATUS and LED ERROR warnings
LED STATUS
GREEN LED ON: normal working status activated ON .
LED STATUS
SLOW FLASHING GREEN LED: working status at energy saving ON .
LED WARNING
GREEN LED ON RED ON: forthcoming shutdown due to OVERLOAD .
LED WARNING
GREEN LED ON RED SLOW FLASHING: forthcoming shutdown due to LOW BATTERY .
LED WARNING
GREEN LED ON RED DOUBLE FLASHING: forthcoming shutdown due to OVER-TEMPERATURE .
LED ERROR
GREEN LED OFF RED ON: inverter shutdown due to OVERLOAD .
LED ERROR
GREEN LED ON RED SLOW FLASHING: forthcoming shutdown due to LOW BATTERY .
LED ERROR
GREEN LED ON RED DOUBLE FLASHING: forthcoming shutdown due to OVER-TEMPERATURE .
LED ERROR
GREEN LED OFF FAST FLASHING RED: inverter shutdown due to OVER-VOLTAGE BATTERY .
Tab. 1 display LED STATUS - ERROR
WARNING: in case of LOCKED inverter, there is no supply voltage at the output AC-OUT, because occurred of one
of the FOUR fault conditions specified in tab. 3, you need to RESTART the device, according to the following
sequence:
1. turning off with switch in position 0 [OFF]
2. wait for 2 seconds
3. new turning on with the switch in position I [ON] or II [ECO]