Westermo SDW-541-F1G-T4G, Руководство пользователя

Страница: 7 / 20

7 6644-2240
Type tests and environmental conditions
Environmental phenomena Basic standard Description Test levels
ESD EN 61000-4-2 Enclosure Contact: ±6 kV
Air: ±8 kV
Fast transients EN 61000-4-4 Power port ±2 kV
Signal ports ±2 kV
Surge EN 61000-4-5 Power port Line to earth: ±2 kV
Line to line: ±1 kV
Signal ports Line to earth: ±2 kV
Line to line: ±1 kV
Power frequency magnetic field EN 61000-4-8 Enclosure 300 A/m; 0, 16.7, 50 Hz
Pulsed magnetic field EN 61000-4-9 Enclosure 300 A/m
Radiated RF immunity EN 61000-4-3 Enclosure 20 V/m @ (80 – 2700) MHz
10 V/m @ (2700 – 6000) MHz
1 kHz sine, 80% AM
Conducted RF immunity EN 61000-4-6 Power port 10 V, 80% AM, 1 kHz; (0.15 – 80) MHz
Signal ports 10 V, 80% AM, 1 kHz; (0.15 – 80) MHz
Radiated RF emission CISPR 16-2-3 Enclosure Class B (30 – 6000 MHz)
ANSI C63,4
(FCC Part 15) Class B (30 – 6500 MHz)
Conducted RF emission CISPR 16-2-1 Power port Class B
Signal ports Class B
Dielectric strength EN 60950-1 Power interface to all other 1.5kV AC @ 60s duration
TX signal interface to all other 1.5kV AC @ 60s duration
TX shield interface to all other 1.5kV AC @ 60s duration
Environmental
Temperatures EN 60068-2-1
EN 60068-2-2 Operating –40 to +74 °C (–40 to +165 °F)
Storage and transport –50 to +85 °C (–58 to +185 °F)
Relative humidity EN 60068-2-30 Operating 5 to 95 % (non-condensing)
Storage and transport 5 to 95 % (condensation allowed
outside packaging)
Altitude Operating 2 000 m/70 kPa
Service life Operating 10 year
Reliability prediction (MTBF) MIL-HDBK-217F Operating SDW-541-F1G-T4G: 1.182.000 hours
SDW-550-T5G: 1.121.000 hours
Vibration IEC 60068-2-6
(sine) Operating 5–9 Hz ±6 mm
9–500 Hz ±2 g
Shock IEC 60068-2-27 Operating 15 g, 11 ms
Mechanical
Enclosure UL94 Plastic Flammability Class V-0
Dimension W x H x D 34 x 123 x 121 mm
Weight 0.2 kg
Mounting DIN-rail
Degree of protection EN 60529 Enclosure IP21
Cooling Convection
Configuration
Auto configured (auto-negotiation) or manually setting of speed and duplex of individual TX port, by DIP-switches. Port
mirror function is possible to set with DIP-switch. With the port mirror function active the switch will copy all outgoing
traffic to port 1. This can be used to monitor all traffic going out from the switch. Packets may be discarded if the total
throughput exceeds the port speed of port 1.