REDUCE THE RISK OF FIRE
To reduce the risk of fire, use only telecommunication line cords with a
cable diameter of AWG 26 or larger. Regarding power cable dimensions,
see chapter Interface Specifications.
CLASS 1 LASER PRODUCT
Do not look directly into a fibre optical port or any connected fibre,
although the product is designed to meet the Class 1 Laser regulations
and complies with 21 CFR 1040.10 and 1040.11.
HANDLING OF SFP TRANSCEIVERS
SFP transceivers are supplied with plugs to avoid contamination inside the
optical port. They are very sensitive to dust and dirt. If the fibre optic
cable is disconnected from the product, a protective plug must be used
on the transmitter/receiver. The protective plug must be kept on during
transportation. The fibre optic cable must be handled the same way.
CORROSIVE GASES
If the product is placed in a corrosive environment, it is important that all
unused connector sockets are protected with a suitable plug, in order to
avoid corrosion attacks on the gold plated connector pins.
ELECTROSTATIC DISCHARGE (ESD)
Prevent electrostatic discharge damage to internal electronic parts by
discharging your body to a grounding point (e.g. use a wrist strap).
6
RedFox 7528 Series
