Westermo RedFox 5528 Series, Руководство пользователя

Страница: 7 / 28

• Do not drop, knock or shake the product. Rough handling above the specification may
cause damage to internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the product.
• Do not paint the product. Paint can clog the product and prevent proper operation.
If the product is not working properly, contact the place of purchase, nearest Westermo
distributor office or Westermo Tech support.
2.4. Maintenance
No maintenance is required, as long as the product is used as intended within the specified
conditions.
2.5. Fibre Optics Handling
Fibre optics equipment need special treatment. It is very sensitive to dust and dirt. If the
fibre will be disconnected from the product, the protective hood on the transmitter/
receiver must be connected. The protective hood must be kept on during transportation.
The fibre optics cable must also be handle the same way.
If these recommendations are not followed, the warranty might be at risk.
2.6. Cleaning Optical Connectors
In the event of contamination, the optical connectors should only be cleansed with
recommended cleaning fluids and correct cleaning equipment. Recommended cleaning
fluids:
• Methyl, ethyl, isopropyl or isobotyl alcohol
• Hexane
• Naphtha
2.7. Product Disposal
This symbol means that the product shall not be treated as unsorted municipal waste when
disposing of it. It needs to be handed over to an applicable collection point for recycling
electrical and electronic equipment.
By ensuring the product is disposed of correctly, you will help to reduce hazardous
substances and prevent potential negative consequences to both environment and human
health, which could be caused by inappropriate disposal.
Figure 1. WEEE symbol for treatment of product disposal
RedFox 5528 Series 7