17
6643-22601
Interface specifications
Power
Operating voltage
Rated: 24 to 48 VDC
Operating: 19 to 60 VDC
Rated current
240 mA @ 24 VDC
120 mA @ 48 VDC
Rated frequency
DC
Inrush current, I
2
t
22.7·10
-3
A
2
s @ 48 VDC
Startup current*
2 x Rated current
Polarity
Reverse polarity protected
Redundant power input
Yes
Isolation to
All other ports
Connection
Detachable screw terminal
Conductor cross section
0.2 - 2.5 mm
2
(AWG 24 - 12)
Stripping length cable
7 mm
Tightening torque, terminal screw 0.5 -0.6 Nm
Tightening torque, screw flange
0.3 Nm
Shielded cable
Not required
* Recommended external supply current capability for proper startup
Ethernet TX
Electrical specification
IEEE std 802.3
Data rate
10 Mbit/s, 100 Mbit/s, manual or auto
Duplex
Full or half, manual or auto
Circuit type
TNV-1
Transmission range
Up to 150 m with CAT5e cable or better*
Isolation to
All other ports
Connection
RJ-45, auto MDI/MDI-X
Shielded cable
Shielded CAT5e or better is recommended
Conductive housing
Yes
Number of ports
8
* Refer to Safety section.
Ethernet SFP pluggable connections (FX or TX)
Electrical specification
IEEE std 802.3
Data rate
100 Mbit/s or 1000 Mbit/s transceivers supported
Duplex
Full or Auto, depending on transceiver
Transmission range
Depending on tranceiver
Connection
SFP slot holding fibre transceiver or copper transceiver
Number of ports
1 or 2
