Westermo ID-90, Руководство по установке

Страница: 4 / 20

4
1 2 3 4 5 6 7 8 9
110-240 VDC
95-240 VAC
Installation
The Terminal Adapter should be connected in the following way:
Power connection is made through screw-block
at bottom right corner.
For HV-version a 3-pole connector,
and for LV-version a 2-pole connector is used.
Computers or other equipment
are connected through an
RS-232/V.24 or RS-485 connec-
tion. The RS-232/V.24 uses a
9-pole D-sub and the RS-485
a 9-pole screw connector.
Do not use ribbon cable
for RS-232/V.24 connections.
Light emit-
ting diodes
Screw-block
for RS-422/485
connection
9-pole D-sub
for RS-232/V.24
connection
Power
connection
Line connec-
tion RJ-45
Alarm
connection
▼
▼
▼
▼
▼
▼
RS-232/V.24 Connections
Pinouts for the 9-pole D-sub
O 1 109 DCD/Data Carrier Detect
O 2 104 RD/Received Data
I 3 103 TD/Transmitted Data
I 4 108/2 DTR/Data Terminal Ready
– 5 102 SG/Signal Ground
O 6 107 DSR/Data Set Ready
I 7 105 RTS/Request to Send
O 8 106 CTS/Clear to Send
O 9 125 RI/Ring Indicator
Signal description
I = input O = output on ID-90
Direction
Pin
no. CCITT V.24
Description
6607-2213
ID-90 LV