5. Specifications
5.1. Interface Specifications
DC, Power port
Rated voltage
a
12-48 VDC, Class III (SELV/PELV)
Operating voltage
9.6-60 VDC
Rated current
1.7 A at 12 VDC
0.67 at 24 VDC
0.35 A at 48 VDC
Fuse rating
Component: U2
Denote time-delay fuse
4A(T)
Rated frequency
DC
Inrush current, I²t
b
0.087 A
2
s at 12 VDC
0.137 A
2
s at 24 VDC
0.400 A
2
s at 48 VDC
Startup current
2x nominal current
Polarity
Reverse polarity protected
Redundant power input
Yes
Isolation
All other ports
Connector
Detachable push-in terminal
Conductor cross section
(flexible)
0.2-1.5 mm² (AWG 24-16). Use copper conductors only.
Stripping length cable
10 mm
Cable temperature rating
For minimum temperature rating of the cable to be connected to the field
wiring terminals: +90 °C
Circuit type
SELV
Shielded cable
Not required
a
Only CE-compliant Class I or Class II power supplies with SELV/PELV output shall be used with the product
b
Measured for 1 second at startup
20
Lynx 5500 Series
