100 Mbps ports, non-PoE
a
Electrical specification
IEEE std 802.3
Data rate
10 Mbps, 100 Mbps, manual or auto
Duplex
Full or half, manual or auto
Circuit type
TNV-1
Transmission range
Up to 150 m with CAT5e cable or better
Isolation
To all other ports
Connector
4-pin, female, M12, D-coded, auto MDI/MDI-X, recommended Westermo
cables:
3146-1100 M12-M12 - 1 m
3146-1101 M12-M12 - 5 m
3146-1103 RJ45-M12 - 1 m
3146-1104 RJ45-M12 - 5 m
Shielded cable
Shielded cable CAT5e or better is recommended
Conductive chassis
Yes
FRNT reconfiguration time
Typically below 20 ms
a
100 Mbps ports, non-PoE, are:
X4, X8, X11-X12 on Viper-x12A-P8-HV/LV
X11 on Viper-x12A-TxG-P8-HV/LV
Gbps ports, non-PoE
a
Electrical specification
IEEE std 802.3
Data rate
10 Mbps, 100 Mbps, 1000 Mbps, manual or auto
Circuit type
TNV-1
Transmission range
Up to 100 m with CAT5e cable or better
Isolation
To all other ports
Connector
8-pin, female, M12, X-coded
Shielded cable
Shielded cable CAT5e or better is recommended
Conductive chassis
Yes
FRNT reconfiguration time
Typically below 20 ms
a
Gbps ports, non-PoE are: X4, X8, X12 on Viper-x12A-TxG-P8-HV/LV
Viper 12A-PoE Series
21