Product description
9
Start-up
For start-up the hand-held sweeper is brought from the rest position to the
working position.
9.1
Adjusting the handle height
To adjust the height of the handle, a handle height adjustment is provided
allowing the height to be set without tools. Thus, the handle height can be
easily, quickly and ergonomically adjusted for different body heights.
9.1.1
Adjustment process
Fig. 6 - Handle height
9.2
Adjusting the brush
Depending on the degree of wear of the bristles or depending on the debris, the
height of the brush can be varied continuously, e.g. for long-fibered debris (hay,
straw) a higher setting is required than, for example, for sand.
The brush height is adjusted via the wing nut.
Fig. 7 - Brush adjustment
Page
24
of
59
After each use, connect the WR 870 Battery to the charger
Unlock locking bolts according to the diagram
on both sides.
Move the handle into the desired working
position.
Lock the latch bolt properly in the bore
hole again.
Loosen the wing nut.
Turn the adjusting knob until the desired brush
height is reached. Observe the directional
markings for lifting and lowering on the sweeper.
Fix the adjusting knob by tightening the wing
nut.
