Installation Guide for Customer Self-Install: Westell ® 516,
Macintosh
Page 12
©2001 SBC Advanced Solutions, Inc. All rights reserved.
6-2
Plug the power cable into the DSL modem and an electrical outlet.
6-3
Connect the data cable to your telephone jack and your DSL modem. There should NOT
be a filter between the data cable and the wall jack.
6-4
Connect the Ethernet cable to the Kingston® Ethernet Port or the built –in Ethernet Port
on the back of your PC and to the Ethernet Port on the back of your DSL modem.
6-5
Turn the DSL Modem power switch
ON
.
6-6 The
Power, Link
and
Ready
lights should all turn solid green within two minutes.
•
If the
Power
light does not turn solid green, check your power cable. Are you connected
to a live electrical outlet? Are connections secured? Is the modem turned on?
•
If the
Link
light does not turn solid green, check your Ethernet connections. Are they
secure? Is the PC turned on?
•
If the
Ready
light does not turn solid green:
•
Verify that there is NO in-line filter on the data cable from your DSL modem to
the telephone jack.
•
Try another telephone jack in your home.
•
Turn off the modem, reboot the computer and then turn the modem back on.
•
Verify that you are installing your DSL equipment AFTER the “Service
Completion Date” given to you when you ordered your DSL Internet Service.
•
If none of these steps cause the DSL light to turn green, please call your Internet
Service Provider 'help desk'.
6-7
Proceed to Step 7 by clicking
Next
on the DSL Modem Setup screen.
