Westell AISG-RM3, Руководство пользователя

Страница: 15 / 22

Section AIS‐RM3‐20B
030‐101806 Rev. A
R
1310IBRA 15
5.4 Summary Report
The
Summary Report
menu, shown in Figure 41, displays an in­
formation summary of the AISG‐RM3 controller and enables
downloading of both the summary report and the system access
log report. These two functions are executed by selecting their
buttons near the top right corner of the screen.
System Setting
Action* Information Recorded Description
SET_NET Current IP, Gateway, Sub­
Network mask Network Setting
SET_SCAN_
LENGTH Current scan length setting
for device scan Set Scan Length
SET_POWER Current DC 12V/24V setting
and power mode Power Setting
SET_SYS_TIME Current system date and
time setting
System Time Setting
REBOOT AISG‐RM3 is rebooted
System Account
Action* Information Recorded Description
ADD_USER Which user account is ad­
ded Add User Account
DELETE_USER Which user account is de­
leted Delete User Account
Device Information Initialization
Action* Information Recorded Description
SCAN A scan process is initiated.
ADD_DEV Vendor code and serial no.
of added device Add Device
SAVE_DEV A save process is initiated for
storing device information to
AISG‐RM3.
RESET_DEV Sector ID Reset Device. Device identi­
fied by Sector ID is reset
Device & Antenna Data Setting
Action* Information Recorded Description
SAVE_
SELECTED Sector ID Save Antenna Data. Selected
antenna data of the device
identified by Sector ID is saved
CONFIGURE_
MODEL Sector ID Save Antenna Model. Antenna
model of the device identified
by Sector ID is changed.
CALIBRATE Sector ID RET Calibrate. Device identi­
fied by Sector ID is calibrated
SET_TILT Sector ID, tilt value Set RET Tilt
SET_GAIN Sector ID, gain value Set TMA Gain
SET_MODE Sector ID, mode Set TMA Mode
*Note: The key word in the Action column is used in the log to represent the recorded action. Information re­
lated to an action in the Information Recorded column is also recorded in the log.
Table 13. TMA Device Data / Fields
Summary Report. The summary report includes the detailed in­
formation on each device, the site information, and system settings.
Figure 41. Summary Report and Access Log
"
"
Click on the Download Report button (see the solid red arrow in
Figure 41) to store a copy of the summary report in html format.
Click on the Download Access Log button (indicated by the
stripped blue arrow in Figure 41) to download a copy of the sys­
tem access history in text format. The access log records the
time, the user, and the type of action that has taken place. Only
actions that pertain to system setting changes, user account ad­
dition and deletion, and device setting changes are recorded.
The actions and the corresponding information recorded in the
log are described in Table 13.
6.
MANAGING ANTENNA CONFIGURATIONS
The
Antenna Config File
menu is used to manage antenna con­
figuration files for RET antenna model configurations. The
antenna configuration file data establishes the relationship
between the movement of a RET drive system and the beam tilt
position of the antenna. If the model of an antenna connected
to a RET device is not in the AISG‐RM3 controller, then its con­
figuration file must be uploaded.
Figure 42. Antenna Configuration File Screen
6.1 Adding a Vendor
A vendor ’s name must exist in the Vendor drop­down list before
uploading one of its antenna model configuration files. To add
a new vendor, click on the Add button (see the red arrow in
Figure 42). The window below appears.
This window asks for the two‐character vendor code assigned by
AISG for use in identifying a product’s vendor. The combination