PS71090-P8 Product Manual
March 2018, Rev A
WESTELL.COM
©2017 Westell Technologies
March 2018; Doc No. CS14000802UM rA
1.877.844.4274
Page 27 of 52
5.4
Mounting the Signal Booster
Follow the instructions in this section to mount the Signal Booster on a wall.
Figure 5-1: Signal Booster Mounting
1.
Using the PS71090-P8 as a template, mark the four (4) locations for the wall
anchoring system screws.
2.
Move the PS71090-P8 unit and drill the mounting holes at the marks in the wall.
Install a wall anchor in each of the four (4) drilled holes.
3.
Install the top two (2) screws into the anchors, leaving enough room to slide the
screws into the oblong holes of the top of the unit’s mounting positions.
4.
Once the Unit is hung on the top two (2) screws finish fastening the top screws.
5.
Install the bottom two (2) screws into the anchors, fastening the Unit to the wall.
