Westeel 10HP, Инструкция по установке и эксплуатации

Страница: 9 / 32

W
ESTEEL
- A
XIAL
F
LOW
A
ERATION
F
AN
2. S
AFETY
F
IRST
3HP, 5HP, 7HP, 10HP, & 15HP 2.2. I
NSTALLATION
S
AFETY
198941 9
• Follow good shop practices:
• keep service area clean and dry
• be sure electrical outlets and tools are properly
grounded
• use adequate light for the job at hand
• Think SAFETY! Work SAFELY!
2.2. INSTALLATION SAFETY
• Check all equipment for damage immediately upon arrival. Do not attempt to
install a damaged item.
• Have 2 people handle the heavy, bulky components.
2.3. OPERATIONAL & MAINTENANCE SAFETY
• Ensure that electrical cords are in good condition; replace if necessary.
• Ensure the fan inlet is not plugged with any foreign material.
• Keep inlet screen in place at all times.
• Before resuming work, install and secure all guards. Keep guards in good
working order.
• Ensure parts are in good condition and installed properly.
2.4. STORAGE SAFETY
• Store the unit in a dry, clean area away from human activity.
• Do not permit children to play on or around the stored machine.
2.5. BIN ROOF SAFETY
To prevent bin damage from aeration:
• Roof vents should be sized at 1 ft
2
for every 1000 ft
3
/min of air to minimize
condensation.
• Operate fan as intended with positive pressure.
• Positive pressure is shown in Figure 2.1, with air entering through the bot-
tom and exiting out the top.
• Fan pressure can be reversed and the fan can be operated with negative
pressure if wiring is modified. However, reversing fan operation can dam-
age the roof.
• Roof vents may become partially or fully blocked with ice in temperatures
below freezing with high humidity conditions. Discontinue operation of fan in
these conditions or add supplemental heat.
• Roof damage may occur to the bin if procedures in this manual are not prop-
erly followed. Operate fan only as described in this manual with positive pres-
sure and using bin roof vents.