Westcott RING LIGHT KIT, Быстрый старт

Страница: 3 / 6

Setup
Attaching to a Light Stand
Turn the lower tension knob counterclockwise to allow mounting to
the light stand. Once mounted, turn the knob clockwise to secure the
connection.
Do not overtighten tension knob.
Tilting the Ring Light
Once mounted and secured to the light stand, use the higher tension
knob to adjust the tilt.
Do not overtighten tension knob.
1. Turn the knob counterclockwise.
2. Adjust the Ring Light to the desired position by tilting the unit
back and forth.
3. Turn the knob clockwise to lock the Ring Light into position.
Warning
• Only use with the included AC power supply and power cord.
• Only use with NP-F Series batteries of the same capacity
(Voltage Range: 7.4V-12V).
• Both batteries should have the same state of charge when
mounted. Avoid using a fully-charged battery and a partially
depleted battery at the same time.
• Always remove batteries during storage and/or transport to
avoid accidental operation which may lead to overheating if in
the travel case.
• Keep away from fire and water.
• Do not submerge in water.
• Do not force electrical connections.
• Do not overtighten the mounting and/or tilting knob.
• Do not overtighten accessories to the mounting thread or cold shoes.
• Do not attempt to open or modify Ring Light.