Westcott FJ80, Руководство пользователя

Страница: 12 / 20

Attaching the FJ80 Magnetic Diffusion Dome with Color Gel [sold separately]
1. Ensure all modifiers have been removed from the FJ80’s articulating flash head.
2. Grasp the edges of the Diffusion Dome, align the tabs of the hard gels to the openings on the
black ring at the base of the Diffusion Dome, insert the selected gel, ensure that the gel’s tabs
are seated in the lower cutout portion of the ring, and rotate the gel clockwise to lock into place.
3. Gently grasp the white dome, align the dome’s opening with the FJ80’s speedlight face, and
gently affix it into place using the magnets.
4. Remove the Magnetic Diffusion Dome by gently grasping the dome and pulling away from the
flash head.
Attaching the Honeycomb Clip & 30° Grid [sold separately]
1. Ensure all modifiers have been removed from the FJ80’s articulating flash head.
2. Grasp the edges of the Honeycomb Clip, align the tabs of the honeycomb grid to the openings
on the clip, insert the honeycomb grid into the slots, then rotate the grid clockwise to lock into
place.
3. Align the clip side with the four magnetic points with the front face of the FJ80 and gently affix it
into place.
4. Remove the Honeycomb Clip and Honeycomb Grid by gently grasping the edges of the clip and
pull away from the flash head.
Attaching the Honeycomb Clip and Color Gels [sold separately]
1. Ensure all modifiers have been removed from the FJ80’s articulating flash head.
2. Grasp the edges of the Honeycomb Clip, align the tabs of the hard gels to the openings on the
clip, insert the gel, ensure that the gel’s tabs are seated in the lower cutout portion of the clip,
and rotate the gel clockwise to lock into place.
a. Add the honeycomb grid to this setup by following step 2 from the section above.
3. Align the clip side with the four magnetic points with the front face of the FJ80 and gently affix it
into place.
4. Remove the Honeycomb Clip & Gel by gently grasping the edges of the clip and pull away from
the flash head.
FJ80 Speedlight: Powering & Testing
Powering On
1. Long press the Power button for 3-seconds until the digital blue power button appears on the
display, release the Power button, and tap the digital blue power button on the touchscreen.
Powering Off
1. Long press the Power button for 3-seconds until the FJ80 turns off.
11