Important
●
It’s recommended that the firmware update installation process be completed only when the
connected computer’s power level is ≥ 25%. Loss of power of any type during this process could
render the FJ-X2m inoperable and require professional repair.
●
Removing the USB cable from the FJ-X2m without properly ejecting the device from your
computer could render the trigger inoperable and require professional repair.
●
Depending on the operating system and the applications running, copying the firmware from your
computer to the FJ-X2m may take a few minutes and/or halt the copying process. Should this
happen, close the copy progress window and try again. Further copying issues may require the
computer to be restarted.
FJ-X2m: Getting Started
Charging the FJ-X2m
1. Access the USB-C port behind the rubber protection gasket.
2. Plug the USB-C cable into the FJ-X2m.
3. Plug the opposing end of the cable in any 5V power source.
4. The estimated charging time is 2 hours.
FJ-X2m: Mounting the FJ-X2m
Hot Shoe Mount
1. Looking at the FJ-X2m screen, turn the
Shoe Lock
dial to the right.
2. Gently slide the FJ-X2m into the camera’s hot shoe.
3. Turn the
Shoe Lock
dial to the left to lock into place. Do not overtighten.
2.5mm PC Port Connection
When the camera’s hot shoe is unavailable, the 2.5mm PC Port allows for basic remote triggering of the
FJ400 strobe using a 2.5mm PC Cable (sold separately).
Mounting the FJ-X2m Sony Adapter (Product #: 4711)
1. Slide the Sony Adapter (sold separately) into the camera’s hot shoe with the release button facing
the back of the camera.
2. Once the adapter is mounted, loosen the FJ-X2m’s
Shoe Lock
dial and slide the FJ-X2m onto the
Sony Adapter.
3. Turn the FJ-X2m
Shoe Lock
dial to the left to lock into place. Do not overtighten.
7
