Note: If no settings are made within 10 seconds, the clock will automatically return to display the normal time.
If this happens, you will need to start the setting procedure again from step 1.
Press VOLUME
+ / -
buttons
to adjust the music volume
(Radio or Bluetooth)
ADJUSTING THE VOLUME
Note: You can store up to 10 FM radio stations.
STORE RADIO
STATIONS PRESETS
Note: To remove an already saved radio station,
another station must be stored in its place.
With the radio turned ON, press the PRESET button
as need to select a radio preset (P01 - P10).
SELECTING A
PRESET RADIO STATION
SLEEP TO MUSIC
Note: This function allows you to listen to the
music (Radio or Bluetooth) while you fall asleep. The
music will automatically shut off after the timer expires.
BLUETOOTH MUSIC
Note: If using the radio, it will turn on to the last
used radio settings (station and volume). To adjust
these settings, please refer to USING THE RADIO,
BLUETOOTH MUSIC, and ADJUSTING THE
VOLUME sections of this instruction manual.
USING THE RADIO
Press the
<<
or
>>
tune buttons
to select a radio station frequency.
Tip: Press and HOLD the
Tune buttons
<<
or
>>
to quickly advance
the radio station frequency.
Note: The FM radio antenna is a thin black
cord on the back of the clock. For best
performance make sure this cord is fully
extended and is not twisted.
Note: When your bluetooth device is
connected, the bluetooth ON indicator will
be illuminated on the display.
The clock will automatically connect to
paired bluetooth devices if the device is
turned on, and within range.
Note: Any time you wish to check the
alarm time, press and hold,
ALARM 1 or ALARM 2.
The display will briefly show the alarm time.
Note: Pressing the POWER button will turn the
Music on to the last used setting
(Radio or Bluetooth).
Use the to select Radio or Bluetooth.
Note: If the volume is too low, check the
volume on your Bluetooth device.
ALARM ON / OFF
Press either ALARM 1 or ALARM 2
button as needed to scroll through
the ON /OFF settings:
BUZZER > RADIO > OFF
Check the Alarm ON indicators and select
your desired alarm option (radio or buzzer).
ALARM ON (RADIO / BUZZ)
USING THE SNOOZE
Press SNOOZE when the alarm is sounding.
The alarm will be silenced temporarily,
but will resume sounding after 9 minutes.
To stop the alarm, Press the button.
Note: The alarm will be turned off, but will
remain on to sound the next day.
TIME SETTING
Press the TIME button for
3 seconds, until the
HOUR & MINUTES start to flash.
#1
Press the TIME button once,
to SAVE and EXIT the time setting.
#3
Press the HOUR & MINUTE buttons
as needed to set the desired
ALARM TIME.
Note: Be sure to set the hour with
the correct AM or PM time period.
#2
ALARM SETTING
Press either ALARM 1 or ALARM 2
for 3 seconds until the
HOUR & MINUTE digits start to flash.
#1
Press the same
ALARM 1 or ALARM 2
button once, to SAVE and EXIT
the alarm time setting.
#3
Press the HOUR & MINUTE buttons
as needed to set the TIME.
Note: Be sure to set the hour with
the correct AM or PM time period.
#2
Tune to the desired radio station by
pressing either
<<
or
>>
tune
to select a radio station.
#1
Press the PRESET button for 2 seconds,
the preset station memory location
(P01 - P10) will be shown on the display.
#2
Press either
<<
or
>>
to select a preset number
(P01 - P10) to save station for later.
#3
Press the PRESET button once
to save the radio station preset.
#4
#2
To turn off the radio, press and hold
the power button for 3 seconds.
#3
Press the RADIO ON button. The radio
station frequency will show on the display.
#1
To reduce the sleep timer, press the
SNOOZE / SLEEP button to reduce
the timer: 90, 80, 70, 60, 50, 40,
30, 20, 10 minutes or OFF.
#2
Press the SNOOZE / SLEEP button.
The display will show 90.
This means the radio will turn off
automatically after 90 minutes.
#1
To cancel the SLEEP timer before
the end of the set time, Press and
hold the POWER button for
3 seconds to turn the music OFF.
#3
Press the POWER ON button.
The music will turn on to the last
used source (Radio or Bluetooth).
#1
Press the SOURCE button
to switch between
RADIO or BLUETOOTH.
Check the display for the Bluetooth ON indicator.
#2
For the first time the bluetooth
is used, you must connect your
bluetooth device.
On your wireless device, Enable blueooth
and connect to device name “71042WM”.
#3
Press either
<<
or
>>
to
skip or go back a song.
#4
Press the PLAY / PAUSE button
to play or pause the current song.
#5
To turn the music off, press
and hold the POWER button for
3 seconds to turn OFF.
#6
