TV
(99 feet maximum)
(30 meters)
(0.9 m)
3
feet
AT
LEAST
APART
Notice:
1. After scanning the QR code to download, if the “Prohibited to Install”
prompt dialog box pops up during installation, you can select
(set-unknown source) to open the unknown source and install it.
2. If the "MAC ERR" is turned on when you power up, please re-energize.
If the retry is invalid, please contact our company.
3. The APP has a city positioning function. If the positioning is correct, you
can directly select the city as the weather forecasting city. If the
positioning is invalid or wrong, please select from the list of cities, but
please send the wrong information to our company for correction.
4. In addition to entering the WiFi password for the first pairing connection,
after the pairing is successful, the APP does not need to enter the
password again to change any information. Just click “confirm” to
update the information
5. Each main unit has a unique MAC code. In principle, each mobile phone
can only control the main unit that is paired successfully, and cannot
control multiple main unit at the same time. However, a main unit can be
controlled by multiple mobile phones, as long as the paired phones can
be successfully paired. Control the main unit, and the paired phone will
not affect the use of the paired phone before
6. The remote indoor and outdoor temperature and humidity viewing
function can only be used for mobile phone APPs that were previously
paired successfully.
7. Once the host computer is paired successfully, it will automatically
obtain and update information such as time, date and weather forecast
from the Internet. In the event of a network problem, the host computer
will be powered off. When the problem is resolved, the host computer
can automatically connect after re-powering without any operation.
8. Due to the large number of routers in the world, there may be situations
where the main unit and the router do not match. Please send the
model and data of the router to our company's mailbox to amend the
program.
9. If the main unit screen WiFi antenna symbol flashes once every
2 seconds, check if the router is disconnected from the network, the
WiFi password is wrong, or the WiFi signal is weak.
10. The power supply requires DC 5.0V, 500mA or more, and the
AAA battery equipped with this unit can only be used for short-term
backup.
Important Placement Guidelines
• To ensure accurate temperature measurement, place units out of direct
sunlight and away from any heat sources or vents.
• Display unit and outdoor sensor must be within 99ft (30m) of each other.
• To maximize wireless range, place units away from large metallic items,
thick walls, metal surfaces, or other objects that may limit wireless
communication.
• To prevent wireless interference, place both units at least 3ft (.9 m) away
from electronic devices(TV, computer, microwave, radio, etc.)
Operating instructions:
1. First make sure that your smartphone is connected to WiFi, then use
or
any browser
to scan the QR code to download and install
(WiFi Weather App may be downloaded on Android Google Play or
Apple App Store)
2. Plug in the power of the main unit, and power on the outdoor transmitter
at the same time, and enter the clock display interface to ensure that the
main unit and the smartphone are in the same WiFi coverage
(5G network is not supported for the time being).
3. When you open the mobile phone APP, you can see the automatically
detected WiFi name in the APP, press the WIFI/SNZ/LIGHT button for
5 seconds
. Then you will hear Bi-Bi-Bi 3 sounds and see the full screen
flashes, in the moment, you should input the WiFi password in the APP
interface . Click Connect WI-FI buttons on the APP to wait for the main
unit to link successfully. Then the app will show “The connection is
successful” and “update successful” with Bi-Bi-Bi 3sounds from the main
unit that mean you connect successfully. The main unit will automatically
update the time, date, weather forecast and weather information by the
mobile app after you set the city . As long as you do not change the
main unit's WiFi environment, you do not need to enter the password
again. The main unit will update automatically by the APP settings.
If the WiFi environment changes, the main unit need to be reset by the
above order.
Notes:
a. When you power up can automatically enter the pairing interface, full
screen flashing waiting for the input password to match and no
buttons, but if you want to different mobile phone control in the same
WiFi environment requires a long press of the button to enter the
pairing mode.
4. The APP can remotely change the main unit’s city name, temperature
unit (°C/°F), days of weather display (1-3 days), auto update time (1H/
3H/6H/12H), set alarm clock and snooze , each time you change the
settings and press OK, the APP displays “Updated Successfully”, and
the main unit and APP will update the latest settings.
5. The APP can remotely view the local real-time indoor/ outdoor
temperature and humidity and temperature / humidity curves
Notes:
a. You can check the temperature and humidity curve on the top right
corner of the sign “. . .”,you can click the sign “. . .”and you will find
there are five operation option for you choose as below:
A. Share 2D Barcode
B. TEMP and HUM of Indoor
C. TEMP and HUM of Outdoor
D. Contact Us
E. Version:V2.4.5
You can click B or C to check the temperature and humidity curve
(the temperature or humidity curve begin to record once you enter the
APP)
b. The APP need keep running if you want to check the temperature and
humidity curve in the distance
6. The LCD shows garbled or the app remind unsuccessful links. Please
reset the power supply and repeat the above steps.
NAMRON AS
Nedre kalbakkvei 88B
1081 Oslo Norway
