PREPARATION
Getting Started
Thanks for purchasing the WM652 marine speakers. Please be aware that any part of this manual is
subject to change without notice.
SAFETY
This symbol is intended to alert the user to the presence of important instructions.
Failure to heed the instructions can result in injury or product damage.
To prevent injury and damage to the product, please read and follow the
instructions in this manual.
If you feel unsure about installing this product, have them installed by a qualified
audio technician.
Before installation, disconnect the battery negative (-) terminal to prevent
damage to the product, fire and/or possible injury.
PREPARATION
Installation
Note:
Parts of the following instructions may not apply to your installation.
The installation instructions included here are basic. If you feel unsure about
installing this product, it is recommended that you enlist the services of a pro-
fessional car/ marine audio installation center.
Before installation, please review the following guidelines:
1. Be sure to carefully read and understand the instructions before attempting to install this product.
2. For safety, disconnect the negative lead from the battery prior to beginning the installation.
3. For easier assembly: If additional wiring is required, we recommend running all wires prior
to mounting your speaker in place.
4. Use the highest quality connectors for a reliable installation and to minimize signal or power loss.
5. Use caution before you drill or cut! Be careful not to cut or drill into gas tanks, fuel lines,
hydraulic lines, vacuum lines or electrical wiring when working on any vessel.
6. Never run speaker wires on the exterior of your vessel. Running speaker wires inside provides the
best protection from environmental elements.
7. Avoid running wires over, near, or through sharp edged surfaces. We suggest you also use rubber
grommets to protect any wires routed through metal or fiberglass.
MARINE SPEAKERS
1-800-BOATING
2
