E-9
West Marine VHF75 Radio Owner’s Manual
Using the radio in scan mode
x
To activate scan mode, press
SCAN DUAL
.
x
You must have at least two channels in memory to start
a scan.
x
You cannot transmit while in scan mode. If you press
PTT
, you will stop scanning but you will not be able to
transmit on that channel. Press
SCAN DUAL
to halt
scanning, then find the channel you want to transmit on.
x
To save a channel into memory, select the channel,
then press and hold the
L/M/H MEM
key. The
MEM
icon
displays whenever you tune to that channel.
x
To remove a channel from memory, set the radio to that
channel, then press and hold the
L/M/H MEM
key. The
MEM
icon no longer displays.
x
When the radio stays on a channel, press
Channel Up
to
leave that channel and resume scanning.
x
To end the scan, press the
SCAN DUAL
key again; the
radio remains on the last scanned channel.
Scan mode with Weather Alert Watch
If you activate Weather Alert Watch while in scan mode, the
radio checks the most recently-used weather channel every
seven seconds, then continues scanning the next channel in
memory:
Scan mode with Triple Watch or Dual Watch
If you activate Triple Watch while operating in scan mode,
the radio checks channels
9.and.16
every two seconds, then
Every seven seconds, the
radio checks the last-used
weather channel, then scans
the next channel.
wx
WX Alert
Watch on
Memory Channel Scan
08
25
24
17
15
14
13
12
11
10
20
