E-47
Installing the Hardware
Connecting to a charplotter
The VHF650 provides a standard NMEA0183 GPS output that you can
connect to a chartplotter. When it receives another boat’s position data in a
DSC call, the radio sends the position data to the chartplotter so you can see
the location:
If Daylight Savings Time is currently in effect, select
On
. If Daylight
Savings Time is not currently in effect, select
Off
.
Press the
SELECT-1W/25W
button. The radio activates the new time
setting and returns to the
GPS Setup
menu.
6.
7.
Disconnect the
accessory cable
from the accessory connection on the
radio.
Connect the ORANGE wire of the
accessory cable
to the NEGATIVE
(-) wire of your chartplotter’s NMEA data INPUT.
Connect the YELLOW wire of the
accessory cable
to the POSITIVE
(+) wire of your chartplotter’s NMEA data INPUT
Be certain all wire connections are secure and that all open wires are
adequately covered.
,I\RXDUH¿QLVKHGFRQQHFWLQJDOOH[WHUQDODFFHVVRULHVOLQHXSWKH
arrows on the side of the
accessory cable
and connector and connect
the
accessory cable
to the
accessory connector
on the back on the
VHF650.
127(7RH[WHQGWKHOLIHRIWKHUDGLRXVHZDWHUSURRIWDSHWRVHDO
electrical connections.
1.
2.
3.
4.
5.
Connecting to an external speaker
<RXFDQXVHDQH[WHUQDOVSHDNHUWRPRQLWRUWKHUDGLRIURPDGLIIHUHQWSDUWRI
your boat or in a noisy environment. If you adjust the
VOLUME-PWR
knob on
WKHUDGLRLWZLOODOVRDGMXVWWKHH[WHUQDOVSHDNHUYROXPH
7KH9+)VXSSRUWVDQH[WHUQDOVSHDNHUZLWKWKHIROORZLQJVSHFL¿FDWLRQV
•
Minimum impedance of 4 Ohms
•
Minimum power handling of 10 Watts
Содержание VHF650
Страница 1: ......
