Instruction Manual
Regatta Timer Watch: #13411301
P.O. Box 50070, Watsonville, CA 95077-0070
1-800-262-8464 • [email protected]
Time Mode
• Displays Hour, Minute, Seconds, AM/PM,
Month, Date & Day of the Week
• 12 Hour or 24 Hour Display
• Auto-Calendar pre-programmed from 2004 to
2099
Daily Alarm Mode
• 2 Daily Alarms - Alarm sounds for 30 seconds
daily at a specific time
• Hourly & Half-hourly Chime
Chronograph Mode
• 1/100 second resolution – counts up to
99:59:59
• 100 Lap memory and recall
Compass Mode
• 1° display (digital). Measures 0° to 360°
• Compass Lock and Backwards compass
bearing
Regatta Time Mode
• 1 second resolution – counts down or up to
99:59:59
• 6 Quick set values: 1, 3, 5, 10, 15 & 45 minutes
& 1 User Pre-set value
• 4 Timer Sounds
•
Last 10 minutes:
Beeps once every minute
•
Last 1 minute:
Beeps once every 10
seconds
•
Last 10 seconds:
Beeps once every second
•
At Zero:
Beeps for 30 seconds
Dual Time Mode
• Display second time zone: Hours, Minutes,
Seconds, AM/PM
Backlight
• Electro-Luminescent (EL) backlight
Battery
• Single 3V Lithium Battery (CR2032)
Regatta Timer Watch #13411301: FUNCTIONS and PRODUCT SPECIFICATION
1.0 INTRODUCTION and WATCH CARE
Congratulations on the purchase of your West Marine Regatta Timer Watch.
This multi-function digital watch is an accurate and reliable electronic instrument which is
designed for outdoor activities. Please carefully read and follow the watch instructions and
care information to ensure that you are able to enjoy your timepiece for years to come.
• Watch can be wiped clean with a cloth, lightly
moistened with fresh water. Apply mild soap if
there are stubborn stains or marks. Never expose
the watch to strong chemicals such as gasoline,
cleaning solvents, acetone, alcohol, or insect
repellents as they may damage the seals, case
and finish.
• Never allow the watch to come into direct contact
with personal care items such as cologne,
perfume, hair products, sun block creams or other
toiletries as these can cause deterioration of the
plastic parts of the watch. If the watch comes into
contact with these or any other chemicals, wipe
them off immediately with a soft, dry cloth.
• This watch contains precise electronic sensors
and components. Never disassemble or attempt
to repair or service your watch yourself. All repairs
and battery replacements should be done by
a trained & certified Watch Repair technician.
Replace dead batteries promptly as dead batteries
can leak and damage the watch components.
• This watch contains a magnetic sensor which
measures compass directions. Keep your watch
away from magnets or items that contain magnets
such as cell phones as this can affect the watch
functions.
• Do not expose the watch to extreme temperature
variances, extreme heat or cold, or extended
exposure to direct sunlight.
• Avoid severe impacts or drops onto hard surfaces,
rough use and shocks.
• Store the watch in a safe, dry place when it is not
being worn.
• Do not fasten the watch strap/band too tightly. You
should be able to insert your finger between the
strap and your wrist.
• Your watch is designed to withstand certain
pressures of water resistance and is rated for a
particular depth and water activity. 50 Meters is
splash resistant but not rated for water sports
or immersion in water. Do not press the buttons
underwater.
R
egatta
t
imeR
W
atch
2.0 BASIC OPERATION: Button Function
See detailed instructions within this Manual
for the sequence of button use in each mode.
3.0 MAjOR FUNCTION MODES: Timekeeping Mode & Compass Mode
4.0 TIME MODE: Current Time Display
Current Time Display
When the Current Time Mode is selected, the
watch display will show the following items:
•
Top Row:
Day of the Week
•
Middle Row:
Current Time
•
Bottom Row:
Date (Day/Month or Month/Day
formats)
•
Rim:
Bar Indicator around the outside of the
display counts elapsed seconds
4.1 CURRENT TIME MODE: Setting the Current Time
How to set the Current Time Display
• From Time Mode, Press & Hold the [M]
button for about 2 seconds until the
flashing “SET” Icon appears (Seconds
display will begin to flash)
• Press the [M] Button to move thru the
setting pattern: Seconds, Minutes, Hour,
Year, Month, Day, Month-Day or Day-
Month display option, 12/24 hour display
option, LCD Display Contrast (1: lowest
to 10: highest), Key Beep (beep sound
when button is pressed: on or off)
• To change the settings, use the [S/S]
button or [L/R] button to increase /
decrease the number or change display
formats (Press & Hold to change the
number at a faster speed)
• When the setting is complete, Press &
Hold the [M] button to exit the setting
display. The watch will also exit the
setting mode if no button has been
pressed for 1 minute.
Mode Button (M)
• Used to select and move thru Watch Modes:
Current Time, Daily Alarm (AL), Chronograph
(CHR), Timer (TMR) and Dual Time (T2)
• Used during setting to select between options
Compass/EL Backlight Button (COM/EL)
• Used to select between Timekeeping Mode
and Compass Mode
• Press & Hold to turn on Backlight (display lit for
about 3 seconds)
Start/Stop Button (S/S)
• Used to select between options while setting
• Used to activate the “start” and “stop”
functions in Chronograph and Timer Mode
• Used to Increase digits during setting functions
Lap Reset Button (L/R)
• Used to activate the “lap” or “reset” function
in Chronograph Mode
• Used to Decrease digits during setting
functions
5.0 DAIly AlARM MODE: Daily Alarm 1, Daily Alarm 2 and Chime Display
• From Current Time Mode, Press the [M] button
to enter Alarm Mode.
• Press the [S/S] button to move from Daily
Alarm 1 “AL 1”, Daily Alarm 2 “AL 2” and
Chime Setting “Chime” (Mode will show only
one chime display in the rotation).
Daily Alarm 1 & Daily Alarm 2
• The watch includes two independent daily
alarms: Daily Alarm 1 and Daily Alarm 2
• If the Alarm is turned on, it will sound at the
pre-set alarm time each day
• When the Alarm sounds, press the [M], [S/S] or
[L/R] button to stop the beep
Hourly & Half-Hour Chime
• The watch includes two chime functions:
Hourly Chime and Half-Hour Chime
• If the Hourly Chime is turned on, the watch will
beep once every hour ON the hour (example:
1:00, 2:00…)
• If the Half-Hour Chime is turned on, the watch
will beep every 30 minutes ON the hour and
Half Hour (example: 1:00, 1:30, 2:00…)
5.1 DAIly AlARM MODE: Setting the Daily Alarm & Chime ON/OFF
• When the Chime is ON, the Chime Indicator
will appear on the display
• In each Setting Display (AL 1, AL2 or CHIME), to turn ON or OFF the 2 Daily Alarms and Chime,
Press the [L/R] button
5.2 DAIly AlARM MODE: Setting the Daily Alarm Time
• In each Setting Display (AL 1, AL 2), Press &
Hold the [M] button for about 2 seconds until
the flashing “SET” icon appears (seconds
display will flash)
• Use the [M] button to select Minute or Hour
setting
• When the digits are flashing, use the [S/S] or
[L/R] button to change the Hour and Minute
Setting
• Press the [M] button to move to the next
setting option
• When the setting is complete, Press & Hold
the [M] button to exit the setting display. The
watch will also exit the setting mode if no
button has been pressed for 1 minute.
5.3 DAIly AlARM MODE: Setting the Chime interval
• When the Daily Alarm 1 or 2 is ON, the Alarm
Indicator will appear on the display
• In each Chime Display, Press & Hold the [M]
button for about 2 seconds until the flashing
“SET” icon appears (“ONE” will flash)
• When the display is flashing, use the [S/S] or
[L/R] button to change between Hourly Chime
“ONE” and Half Hourly Chime “HALF”
• When the setting is complete, Press & Hold the
[M] button to exit the setting display. The watch
will also exit the setting mode if no button has
been pressed for 1 minute.
6.1 CHRONOgRAPH MODE: Using the Chronograph
• Press the [S/S] Button to Start the
Chronograph (start counting)
• Press the [S/S] Button to Stop the
Chronograph (stop counting)
• The elapsed time will appear on the display
• Repeat the above steps to resume counting
and get the accumulated elapsed time (the
time the Chronograph is stopped will not
be counted when the chronograph resumes
counting. To count total time from when
Chrono starts and record laps or split times,
use Lap Mode instruction in next section)
6.2 CHRONOgRAPH MODE: Recording & Recalling lap Time
How to Record Lap Time
• In Chronograph Mode, Press [S/S] to Start
the Chronograph
• Press the [L/R] button once to record Lap
time. “1L” appears on the top row of the
display. Pressing the button does not stop
the chronograph
• The Lap Number (1L, 2L, etc) and lap time
will appear on the display for 10 seconds
and then the chronograph will return to the
Lap Counting Display
• Press the [L/R] button to record each lap.
The watch has a 100 lap memory.
How to Recall & Reset Lap Time
• To Recall Lap Time: in the Chronograph
Display, Press & Hold the [M] button. Total
Time is displayed “TTL” (Pressing the
button to recall lap times does not stop the
chronograph)
• Press the [S/S] or [L/R] button to recall lap
times
• Press & Hold the [M] button to exit the recall sequence
• To record a new set of laps. Press the [S/S] button to stop the Chronograph. Press and hold the
[L/R] button to zero out (00:00) the display and begin a new set of recordings
The watch includes a Chronograph Mode with measures
elapsed time, accumulated elapsed time and lap times.
• From TIME Mode, Press the [M] button two times to
enter Chronograph Mode “CHR”.
• The display shows all Zeros when the watch enters
Chrono Mode or the Chronograph has been reset.
• In Chronograph Mode the display shows:
•
Top Row:
Mode (CHR)
•
Middle Row:
Hours, Minutes and Seconds
•
Bottom Row:
1/100 Second
•
Rim:
Bar Indicator around the outside of the display counts 1/10 second
7.0 REgATTA TIME MODE: Countdown Time & Quick Set Values
In Regatta Timer Mode, the watch counts down from a fixed
period of time (target time).
• From TIME Mode, Press the [M] button three times to
enter Timer Mode “TMR”.
• The timer will countdown from the target time to zero
• The Target Time can be set by using Quick Set Values or
User Preset Values
• In Regatta Timer Mode the display shows:
•
Top Row:
Mode (TMR)
•
Middle Row:
Target Time
•
Bottom Row:
Current Time
•
Rim:
Bar Indicator around the outside of the display
counts elapsed seconds
• Quick Set Values cannot be changed by the user. The watch
has 6 Quick Set Values: 1, 3, 5, 10, 15 and 45 minutes
• The User Preset Value can be set and stored in the watch. It can
be set for a time up to 99 hours, 59 minutes and 99 seconds
In Regatta Timer Mode, Press the [L/R] Button to move
between the Target Times as per the illustration
6.0 CHRONOgRAPH MODE: Chronograph Display
COnTInuED On REvERSE
