US/CN Page
4
of
5
Install the Light Fixture onto the Wood shelf
Separate the Flat Plate (I) from the Lamp Cup (F) by
unscrewing the Knurled
Nut (J).
Insert the Plug and Switch (K) through the hole of Wood Shelf
(H), and then insert the
Knurled
Nut (J) & Flat Plate(I) through
the hole in order.
Pre-drill pilot holes at the marker locations. This will make
installing the Wall Screws (B) into the wall easier.
1. Attach the Mounting Plate (G) onto the wall aligning the 4
holes on Mounting Plate (G) with the 4 marked locations.
2. Insert the Mounting Screws (B) and tighten each to secure
the Mounting Plate (G) firmly onto the wall by using a
screwdriver.
C1
C2
