Dry Wall Installation
(diagram shown on the right and below)
Using a Phillips screwdriver to engage an anchor, press the anchor tip against the wall at insertion mark. Driver the anchor
into the wall (turn the clockwise while applying an even pressure on it) until its head is flush with the wall surface. Do not
over-tighten. Once all anchors are in place, place the wall-
Bracket over the anchors and insert mounting screws clockwise just until you feel resistance.
Stud Mounting (see illustration below):
If the mark aligns with a wall stud, hold the mounting bracket against the wall so that the hole of the bracket aligns. Then
use the screwdriver to install a screw through the hole and directly into the wall and stud. Rotate the screw clockwise until
the mounting bracket is firmly secured to the wall.
Once the wall-mount bracket is secured to the wall, raise the Cabinet and position the Cabinet’s bracket over the wall-
mount bracket so that the brackets engage each other. Make sure the ends of both brackets are aligned.
