1
REV A
Tools Required
Spanner / Socket – 17mm, 19mm, 24mm (2 of Each)
Screwdriver – Flat Head or Philips
Large Adjustable Spanner
1.
Install RHS upper body using the three bolts labelled above – Do Not Fully Tighten
(Note: One bolt is longer than the others and requires a full nut)
M12 X 130
M12 X 100
M12 X 100
Full Nut
Nyloc Nut
Nyloc Nut
Rear Brace
Front Brace
Log Pusher
Valve Block
Mount
Front Leg x2
Arc x2
Rear Leg x2
Frame
Upper x2
Control Leaver x2
Lower Link Pin
End Plate
Cover / Chute
Main Spine Assembly
Clamp Plate