![Weslo Vector 502 Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/weslo/vector-502/vector-502_manual_958028013.webp)
13
The Centre
part of the
display will
show both
your ped-
alling speed
and the dis-
tance that
you have pedalled.
Note: The display can show
speed and distance in either miles or kilome-
tres. To change the unit of measurement, hold
down the On/Reset button for about six sec-
onds. (When the batteries are replaced, it may
be necessary to reselect the desired unit of
measurement.)
The lower
part of the
display will
show your
heart rate (if
you are
wearing the
chest pulse
sensor) and the numbers of calories and fat calo-
ries you have burned (see FAT BURNING on
page 16). Every few seconds, the display will
alternate between calories burned and fat calories
burned, as shown by the mode bars. Note: To
view only calories burned, press the Mode button.
To view only fat calories burned, press the Mode
button again. To view both calories burned and fat
calories burned, press the Mode button a third
time.
In addition,
the pace indi-
cator on the
right side of
the display
will provide a
visual repre-
sentation of
your pedalling pace. As you increase or decrease
your pace, the indicator will increase or decrease
in height.
To reset the display, press the On/Reset button.
To turn off the console, stop pedalling.
If the pedals are not moved and the console but-
tons are not pressed for a few minutes,
the con-
sole will automatically turn off to conserve
the batteries.
6
Km/H
RPM
Kms
Mode Bar
Km/H
RPM
Kms
Pace Indicator
Km/H
RPM
Kms