9
11. While another person holds the Upright (13)
near the Frame (1), connect the Extension Wire
(36) to the Reed Switch Wire (43).
Next, connect the Resistance Cable (19) to the
Lower Cable (45) in the following way:
•
See drawing A.
Pull up on the metal bracket
on the Lower Cable (45), and insert the tip of
the Resistance Cable (19) into the wire clip
inside the metal bracket as shown.
•
See drawing B.
Firmly pull up the Resistance
Cable (19) and slide it into the top of the metal
bracket as shown.
•
See drawing C.
Using pliers, squeeze the
prongs on the upper end of the metal bracket
together.
Insert the excess wire and cable downward into
the Frame (1). Slide the Upright (13) onto the
Frame.
Tip: Avoid pinching the wires and cables.
Attach the Upright (13) with two M8 x 15mm
Patch Screws (34) and two M8 Split Washers
(42).
45
1
34
42
42
43
13
19
36
A
B
C
45
19
19
Metal
Bracket
Metal
Bracket
45
11
10. While another person holds the Handlebar (15)
near the Upright (13), connect the console wire
to the Extension Wire (36).
Tip: Avoid pinching the wires.
Attach the
Handlebar (15) to the Upright (13) with two M8
x 15mm Patch Screws (34) and two M8 Split
Washers (42).
10
34
42
15
36
Console
Wire
13
Avoid pinching
the wires
Avoid pinching the
wires and cables