5
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
Assembly requires two persons.
Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included
tools, assembly requires a Phillips screwdriver , two adjustable wrenches , and
pliers .
As you assemble the exercise cycle, use the drawings below to identify the small parts used in assembly. The
number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of
this manual. The number following the parentheses is the quantity needed for assembly.
Note: Some small
parts may have been preassembled. If a part is not in the parts bag, check to see if it has been pre-
assembled.
M10 x 70mm Carriage Bolt (30)–4
M8 x 125mm Bolt (62)–2
M8 x 16mm Button
Screw (34)–4
M10 Nylon
Locknut (19)–4
M8 Nylon
Locknut (10)–2
M6 Nylon
Locknut (63)–4
Acorn Cover
(65)–4
M8 Washer
(49)–4
M6 Washer
(54)–8
M10 Washer
(52)–4
M6 Curved
Washer (55)–4
M8 Split
Washer (42)–4
M5 x 16mm Self-
tapping Screw (46)–4
M6 x 35mm Screw
(61)–8
M6 x 30mm Bolt
(64)–4
