Weslo Pursuit 4.8 Bike, Руководство пользователя

Страница: 8 / 20

8
8. Connect the console wire harness to the Upper
Wire Harness (36). Insert the excess wire harness
into the Upright (13).
Attach the Console (16) to the Upright (13) with four
M4 x 16mm Round Head Screws (52).
8
16
13
36
Console
Wire
Harness
52
7
Battery Cover
Batteries
16
7. The Console (16) can use four 1.5V D batteries
(not included); alkaline batteries are recommended.
IMPORTANT: If the Console has been exposed
to cold temperatures, allow it to warm to room
temperature before inserting batteries.
Otherwise, you may damage the console dis-
plays or other electronic components. Remove
the battery cover, insert the batteries into the bat-
tery compartment, and reattach the battery cover.
Make sure to orient the batteries as shown by
the diagram inside the battery compartment.
13
36
9
9. Connect the Upper Wire Harness (36) to the Lower
Wire Harness (8).
Tip: Avoid pinching the wire harnesses. Attach
the Upright (13) to the Frame (1) with three M8 x
25mm Patch Screws (33) and three M8 Split
Washers (59).
8
33
33
33
59
59
1