8
6.
Make sure that all parts are properly tightened before you use the treadmill.
Keep the included hex keys
in a secure place. One of the hex keys is used to adjust the walking belt (see page 17). To protect the floor or
carpet, place a mat under the treadmill.
4. Attach the console assembly to the Upright (73)
and the Handrails (69) with five M4.2 x 19mm
Screws (3).
Be careful not to pinch the wires.
4
5. Attach the Latch Housing (72) to the left Upright
(73) with two #10 x 1" Tek Screws (7);
start
both Screws, and then tighten them.
5
3
7
73
72
69
69
3
3
Console Assembly
73