Weslo CADENCE AF 5.1 Скачать руководство пользователя

Страница: 17 / 24

SYMPTOM: The walking belt slows when walked on

a. Use only a single-outlet surge suppressor that

meets all of the specifications described on page 10.

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be-

come damaged. Remove the key and

UNPLUG

THE POWER CORD.

Using the hex key, turn both

idler roller screws counterclockwise, 1/4 of a turn.

When the walking belt is properly tightened, you

should be able to lift each edge of the walking belt

2 to 3 in. (5 to 7 cm) off the walking platform. Be

careful to keep the walking belt centered. Then,

plug in the power cord, insert the key, and run the

treadmill for a few minutes. Repeat until the walk-

ing belt is properly tightened.

c. If the walking belt still slows when walked on, see

the front cover of this manual.

SYMPTOM: The walking belt is off-center or slips

when walked on

If the walking belt is off-center,

first remove the

key and

UNPLUG THE POWER CORD. If the

walking belt has shifted to the left,

use the hex

key to turn the left idler roller screw clockwise 1/2

of a turn;

if the walking belt has shifted to the

right,

turn the left idler roller screw counterclock-

wise 1/2 of a turn. Be careful not to overtighten the

walking belt. Then, plug in the power cord, insert

the key, and run the treadmill for a few minutes.

Repeat until the walking belt is centered.

If the walking belt slips when walked on,

first re-

move the key and

UNPLUG THE POWER CORD.

Using the hex key, turn both idler roller screws

clockwise, 1/4 of a turn. When the walking belt is

correctly tightened, you should be able to lift each

edge of the walking belt 2 to 3 in. (5 to 7 cm) off

the walking platform. Be careful to keep the walk-

ing belt centered. Then, plug in the power cord, in-

sert the key, and carefully walk on the treadmill for

a few minutes. Repeat until the walking belt is

properly tightened.

2–3 in.

Idler Roller

Screws

Содержание CADENCE AF 5.1

























Результаты поиска

Содержание CADENCE AF 5.1

Отзывы:

Похожие инструкции для CADENCE AF 5.1

Бренды по названию

Популярные бренды

Weslo CADENCE AF 5.1, Руководство пользователя

Результаты поиска

Содержание CADENCE AF 5.1

Отзывы:

Похожие инструкции для CADENCE AF 5.1

Бренды по названию

Популярные бренды