14
THE INFORMATION MODE
The console features an information mode that allows
you to turn on and turn off the demo mode and to se-
lect miles or kilometers as the unit of measurement.
The information mode also keeps track of treadmill
usage information.
To select the information mode, hold down the Stop
button, insert the key into the console, and then re-
lease the Stop button. When the information mode is
selected, the following information will appear in the
display:
The console features a dis-
play demo mode, designed
to be used if the treadmill is
displayed in a store. While
the demo mode is turned
on, the console will function
normally when you plug in the power cord, press the
power switch into the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a “d” will ap-
pear in the left display while the information mode is
selected. To turn on or turn off the demo mode, press
the Speed decrease button.
The left display will also show an “M” for metric kilome-
ters or an “E” for English miles. To change the unit of
measurement, press the Speed increase button.
The right display will show
the total number of hours
that the treadmill has been
operated and the total num-
ber of miles or kilometers
that the walking belt has
moved, for a few seconds each.
To exit the information mode, remove the key from the
console.