background image

3

15. The treadmill is capable of high speeds.

Adjust the speed in small increments to
avoid sudden jumps in speed. 

16. The pulse sensor is not a medical device.

Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

17. Never leave the treadmill unattended while it

is running. Always remove the key when the
treadmill is not in use. 

18. Do not change the incline of the treadmill by

placing objects under the treadmill.

19. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 10.) You must be
able to safely lift 45 pounds in order to raise,

lower, or move the treadmill. 

20. When storing the treadmill, make sure that

the storage latch is fully closed.

21. Inspect and tighten all parts of the treadmill

every three months.

22. Never insert any object into any opening.

23.

DANGER: 

Always unplug the power cord

before performing the maintenance and
adjustment procedures described in this
manual. Never remove the motor hood
unless instructed to do so by an authorized
service representative. Servicing other than
the procedures in this manual should be per-
formed by an authorized service representa-
tive only.

24. This treadmill is intended for in-home use

only. Do not use this treadmill in any com-
mercial, rental, or institutional setting.

WARNING:

Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health prob-
lems. Read all instructions before using. ICON assumes no responsibility for personal injury or prop-
erty damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown at the right has been
placed on your treadmill. If the decal is
missing, or if it is not legible, please call
our Customer Service Department, toll-
free, to order a free replacement decal
(see ORDERING REPLACEMENT PARTS
on the back cover of this manual). Apply
the decal in the location shown.

Содержание Cadence 1020 Treadmill




















Отзывы: