Wesco PES360MU, Инструкция по эксплуатации

Страница: 8 / 12

8
EN
Excessive force will reduce the sanding efficiency
and cause motor overload. Replacing the sanding
paper regularly will maintain optimum sanding
efficiency.
MAINTENANCE
Remove the plug from the socket before carrying
out any adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage your
power tool.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
TROUBLESHOOTING
1. If your sander will not operate, check the power at
the mains plug.
2. If the sander does not abrade surface, checking
the sanding paper. If the sanding paper has been
worn, replace the new paper and try again. The
paper must be kept in a dry place, if it is allowed to
become damp, the abrasive particles will lose their
adhesion to the backing paper and will not abrade.
3. If the sander dose not move smoothly, The sanding
paper may be loose, damaged or wrinkled. Replace
and try again.
4. If a fault cannot be rectified return the sander to an
authorized dealer for repair.