Wesco DM160, Руководство пользователя, Страница: 12 / 16

12
EN
USING ACCESSORIES
The chart below lists the description, use speed and scope for some of the small articles supplied together with the tool by
category. To achieve best performance of the tool, it is strongly recommended that you read it prior to operation, failure to
adhere to this may cause accessories to fail.
NOTE: ALWAYS Wear eye protection Insert the shaft FULLY into the collet. Use ONLY up to the speeds stated below.
PICTURE DESCRIPTION SPEED FOR USE ON:
Grinder bits
Various head styles,
on shafts Full speed Metal
Mild steel
Diamond Bits
Various head styles Full speed Wood Zinc
Plastic Nickel
Copper Mild steel
Wool Wheel
Mounted to screw drill Half speed Metal
Mild steel
Sanding/Cutting wheels
Mounted to cutting wheel fixture
NOTE: DO NOT over tighten screw Half speed Metal
Mild steel
Wood
Sanding Roll
Mounted on hold for rubber wheel Full speed Metal
Mild steel
NOTE:
To fit the sanding roll, firstly loosen the small screw on top of the hole for rubber wheel,
this will allow the rubber to relax. Slide the sanding roll onto the holder.
To secure, simply tighten the screw and the rubber roll will swell, gripping the sanding drum.