159315A
©Copyright 2020 WESCO Industrial Products, LLC. Specifications subject to change. Not responsible for errors or omissions.
ATTENTION: TO ENSURE SAFE AND EASY USE OF YOUR WESCO DRUM HANDLER, READ THESE INSTRUCTIONS BEFORE USING.
Drum Handler DM-800-MDT-PLPD
Operating Instructions and Parts Manual
Operation
Saddle Attachment
1. Move unit towards drum until back of saddle contacts drum.
2. Attach lifter saddle around center of drum (between rolling hoops) and secure with chain and ratchet tightener.
a. Wrap chain tightly around front of barrel.
b. Feed chain through ratchet teeth
c. Engage ratchet handle to lock into pawl.
3. Lift up on pawl to release ratchet.
4. Repeat steps 3 & 4, pulling more links through the ratchet teeth, to ensure tight grip.
Figure 1
Figure 2
Figure 3
Step 3B
Step 3C
Step 4
Transportation
1. Move unit towards drum until back of saddle contacts drum.
2. Attach lifter saddle around center of drum (between rolling hoops) and secure with chain and tightener.
3. Raise drum off the ground, 3” maximum.
4. Disengage floor locks and transport drum to destination.
Drum Rotation
1. Attach lifter saddle around center of drum (between rolling hoops) and secure with chain and tightener. (See “
Saddle
Attachment Operation”
above
)
2. Raise to desired height.
3. Disengage spring pin by lifting up and rotating 90 degrees.
4. Pull handle to rotate drum to desired position then re-engage spring pin. Note: Saddle will rotate until locking into
second positional hole.
5. Re-engage pin until pouring completed.
Figure 4
Figure 5
