Wesco CSJ18W, Руководство пользователя, Страница: 11 / 12

11
EN
not force the cutting blade when cutting thin metal or sheet
steel, as they are harder materials and will take longer to
cut. Excessive blade force may reduce the life of the blade or
damage the motor. To reduce heat during metal cutting, add
a little lubricant along the cutting line.
MAINTENANCE
Remove the battery pack from the tool before carrying
out any adjustment, servicing or maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your power
tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust. Occasionally you may
see sparks through the ventilation slots. This is normal and
will not damage your power tool.
For Battery tools
The ambient temperature range for the use and storage of
tool and battery is 0
o
C (44.6
o
F)-45
o
C (113
o
F).
The recommended ambient temperature range for the
charging system during charging is 0
o
C (44.6
o
F)-40
o
C
(104
o
F).
TROUBLESHOOTING
Symptom
Possible
Causes
Possible Solution
The tool
suddenly
stops during
operation. Overload
Battery
temperature too
high Relieve the load on the
machine immediately
and allow cooling for
approx. 30 seconds by
running the machine
on no-load.
Low battery
capacity Charge the battery
pack.
FCC PART 15
Supplier’s Declaration of Conformity
Product Description: Battery charger
Model Number: WS9924U
Trade Name: WESCO
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Responsible Party :
Positec USA, Inc.
10130 Perimeter Parkway, Charlotte, NC 28216 USA
Tel.: (704) 599-3711
Fax: (704) 599-6390