Wesco CCS36WT, Руководство пользователя

Страница: 12 / 20

12
EN
POSITEC Inc. has established a partnership with the
RBRC Corporation to recycle any Positec batteries
with the RBRC-call2recycle seal. For environmental
protection, please do not discard batteries in the trash.
After the batteries’ life cycle is ended, then please call
1-800-822-8837 for a free service that will properly
dispose of the battery.
SYMBOLS
To reduce the risk of injury, user must read
instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain
Do not burn
Batteries may enter water cycle if disposed
improperly, which can be hazardous for
ecosystem. Do not dispose of waste
batteries as unsorted municipal waste.
Li-Ion battery, battery must be recycled
Always use chain saw two-handed
Beware of chain saw kickback and avoid
contact with bar tip
When the log is supported on one end, as illustrated
in Figure 4, cut 1/3 the diameter from the underside
(underbuck) (1). Then make the finished cut by
overbucking (2) to meet the first cut.
W
Y
Z
X
1
1
2 2
3
1
2
2/3
1
1/3
1
2
2/3
1/3
Injecting grease to lubricate
Fig.1 Fig.3
Fig.2 Fig.4
Fig.5 Fig.6
Fig.A1
Fig.A2
Fig.A3 Fig.A4
Fig.A5
Fig.A6
Fig.A7
Fig.A8
Fig.A9
Fig.A10
Fig.B Fig.C
Fig.D1
Fig.D2
Fig.D3
Fig.E
Fig.F
Fig.G
Fig.H
Fig.I
Fig.J
1
2
1
2
Pos.1 Pos.2
Pos1
Pos2
Pos2
When the log is supported on both ends, as illustrated
in Figure 5, cut 1/3 the diameter from the top (overbuck)
(1). Then make the finished cut by underbucking (2) the
lower 2/3 to meet the first cut.
W
Y
Z
X
1
1
2 2
3
1
2
2/3
1
1/3
1
2
2/3
1/3
Injecting grease to lubricate
Fig.1 Fig.3
Fig.2 Fig.4
Fig.5 Fig.6
Fig.A1 Fig.A2
Fig.A3 Fig.A4
Fig.A5
Fig.A6
Fig.A7 Fig.A8
Fig.A9
Fig.A10
Fig.B
Fig.C
Fig.D1 Fig.D2
Fig.D3
Fig.E
Fig.F
Fig.G
Fig.H
Fig.I
Fig.J
1
2
1
2
Pos.1 Pos.2
Pos1
Pos2
Pos2
When bucking on a slope always stand on the uphill
side of the log, as illustrated in Figure 6. When “cutting
through”, to maintain complete control, release the
cutting pressure near the end of the cut without relaxing
your grip on the chainsaw handles. Don’t let the chain
contact the ground. After completing the cut, wait for
the saw chain to stop before you move the chainsaw.
Always stop the motor before moving from tree to tree.
W
Y
Z
X
1
1
2 2
3
1
2
2/3
1
1/3
1
2
2/3
1/3
Injecting grease to lubricate
Fig.1 Fig.3
Fig.2
Fig.4
Fig.5 Fig.6
Fig.A1 Fig.A2
Fig.A3
Fig.A4
Fig.A5
Fig.A6
Fig.A7
Fig.A8
Fig.A9
Fig.A10
Fig.B
Fig.C
Fig.D1
Fig.D2
Fig.D3
Fig.E
Fig.F
Fig.G
Fig.H
Fig.I
Fig.J
1
2
1
2
Pos.1 Pos.2
Pos1
Pos2
Pos2