WERTHEIM Elegance Robot, Быстрый старт

Страница: 9 / 20

9
Elegance Robot
ASSEMBLY
IMPORTANT: Always remove the power plug from the power supply before
assembly.
1. Connect the charger adaptor to the charging
base, as shown, then connect the power plug
to the power supply.
2. To avoid the robot being entangled in the
power cord, ensure that excess power cord
is neatly stored inside the charging base, as
shown.
3. Set the charging base on a level surface next to
a wall.
IMPORTANT!
Place the Charging Base in an open, uncluttered
area leaving the following distances around the
Charging Base:
• At least 1 meter on each side of the Charging
Base
• At least 2 meters in front of the Charging Base,
and at least 1.5 meters away from stairs
• Always keep the Charging Base plugged in
and make sure it is in an area with consistent
Wi-Fi
®
coverage to allow the robot to receive
information via the Wertheim Elegance Robot
App.