Werock Rocktab S500, Руководство пользователя

Страница: 101 / 110

Rocktab S500 User Manual
101 / 110
The screen suddenly goes black and the power indicator goes out
 Make sure that the power adapter is properly connected.
 If the device is running on battery power, the battery may be dead. Charge the battery.
The quality of the wireless LAN signal is poor
 The notebook may be out of range. Move the notebook closer to the access point or another
wireless LAN device that is connected to it.
 Check if there is any interference in your environment, such as microwave ovens, cordless phones.
Move the tablet away from objects that cause interference.
I cannot connect to another wireless LAN device.
 Make sure the wireless LAN function is turned on.
 Make sure the SSID setting is the same for each wireless LAN device on the network.
 Reboot the notebook.
 Make sure the IP address or subnet mask setting is correct.
I can't connect to another device with Bluetooth

Make sure that Bluetooth is turned on for both devices.

Make sure the distance between the two devices is 10 meters max and there are no walls or major
obstacles between the devices.

Make sure both devices are turned on and configured to be detected.

Make sure that both devices are compatible.
The GPS application cannot find my location

Make sure that the GPS is turned on.

Make sure the GPS receiver and location sensor are enabled in the control panel.

The notebook may be out of range of reception.

Move the notebook outside or closer to a window.

Check for interference in your environment, such as microwave ovens, cordless phones. Move the
notebook away from objects that cause interference.
No sound is output
 Adjust the volume of the notebook by pressing the volume controls.
 If you are using an external audio device, make sure the cable is connected properly.
The computer does not recognize a newly installed device.
heck if a device driver needs to be installed. (Refer to the documentation supplied with the device).

The device may not be configured correctly in the BIOS setup program. Run the BIOS setup
program to identify the new type.

Check the cables or power cords for proper connections.

For an external device that has its own power switch, make sure the device is turned on.
I cannot access the LAN network.

Make sure the LAN cable is properly connected to the RJ-45 port and the network hub.

Make sure the network configuration is correct.

Make sure the user name or password is correct.