4. Repeat 3
.
until you have chosen
your list.
5. To DELETE a patch in the song list press exit and follow instructions on screen.
6. To INSERT a patch in the song list press save and follow instructions on screen.
7. To finish, press the 'Save' button to left of the screen (and again).
8. Press 'Exit' right of screen
You can make a song list of up to 50 patches.
8.3 Patch Settings
See section 4.0 for a definition of Patch. You can store up to 128 patches in the memory.
These 128 patches have been pre-programmed using the 128 GM format sounds. You can
alter the parameters listed below to customize these patches. If at any time you want to
get the factory default settings back go to Global Settings J. See section 8.0 on how to get
into the Patch Settings and on how to change parameters using patch and octave buttons.
PATCH EDIT SCREEN
▼
First select your Patch Number on the top line using the Octave Shift buttons. They are
numbered 1 -128. They are pre-programmed and named using the 128 internal GM
sounds.
A. Programme
1-128 (or 0-127)
Selects programme number
B. Channel
1-16 (or 0-15)
Selects Channel Number
C. Bank
1-16 (or 0-15)
Selects bank Number
D. Octave
0, 12, 24, 36, 48, 60,
72, 84, 96, 108
Sets the MIDI Note Number of the first key in steps of
12
E. Semitone
000-011
Offsets the MIDI Note Number of the first key in steps
of 1.
F. Min Velocity
001-127
Sets minimum MIDI Velocity for lightest hit.
G. Max Velocity
001-127
Sets maximum MIDI Velocity for hardest hit
H. Note Length
0.01-8.00
Sets default Note Length for patch. Note length Knob
movement will over-ride value.
I. Dampening
requires action
Select dampening to unlock. Set dampening level
using mallet strikes to set maximum dampening level.
Can be fine tuned using buttons. Will lock again on
exit. To turn OFF, reduce level to 0 and SAVE.
J. Polyphony
Poly/Mono
Selects polyphonic or monophonic mode.
K. Octave Shift
LATCH
Shifts 1 octave and holds new value when pedal is released
SINGL
Shifts 1 octave but reverts when the pedal is released.
L. Sustain Mode
HOLD
– Holds off sending out MIDI note off messages until pedal is
released then all note off messages are sent.
MIDI CC 64
– On/Off switch that controls sustain.
9
◄ 001 ACOUSTIC GRAND ►
A. Program
001
B. Channel
001
C. Bank
001
