11
1) Separate the inner and outer sections com
-
pletely by unlocking the “J” locks and sliding
the outer sections off the inner section.
2) Place inner section in stepladder position.
This is the irst of two trestles required for
the scaffold position.
3) Using both remaining outer ladder sec
-
tions, turn one section 180 degrees and
insert the “J” locks of one section into the
adjacent holes of the other section as shown in
Figure 5.
4) Lower the outer ladder section with the disengaged “J” locks (See Figure 6) while
spreading the two sections apart to form the second trestle required for the scaffold position.
See Figure 7.
Figure 6
Figure 7
Figure 5
• Plank should not be placed on top rung.
• Plank should be secured to the ladder on both ends by
tying to the ladder.
• Use tie downs to secure plank to both ladder sections.
CAUTION
Position #4
2-Scaffold Base
Do not use inner ladder section or outer ladder sections
as separate stepladders. Sections only to be used as
scaffold bases.
WARNING
