WERKU WK500600, Оригинальное руководство пользователя

Страница: 4 / 40

4
English
ENG
are damaged
►
Many accidents are caused by
poorly maintained airless tools
►
Use airless tools,
accessories and tool tips, etc. according to these
instructions and in the manner provided for the
particular type of airless tool, taking into account
the conditions work and work to develop
►
The use
of the airless tool for applications other than those
intended could result in a dangerous situation
►
Please check your airless tool serviced by a
Werku
®
official repair service using only identical
replacement parts
►
This will ensure the safety of
the airless tool is maintained.
CHECK THE GOOD CONDITION OF THE
AIRLESS GUN.
►
Make sure that all the screws in the airless
gun are perfectly tightened
►
Make sure that the
possible installed accessories are perfectly fitted in
place.
BEFORE STARTING WORK.
►
Make sure that the suction airless gun is firmly
supported before using
►
Check that no one is
standing beneath you when using the suction
airless gun in high areas.
DURING THE OPERATION.
►
Do not leave the suction airless gun operating
without having it firmly fixed
►
Only turn it on when
you are sure you have full control over it
►
Do not
point the suction airless gun at anyone while in
use
►
When operating the suction airless gun will
produce vibrations
►
The screws may gradually
come loose, and possibly cause faults or accidents.
AT FINISH WORKING.
►
Do not touch the possible accessories installed
in the suction airless gun after use
►
It may be
hot and cause burns
►
Some materials worked
with may contain chemicals or toxic components
►
Avoid inhaling these substances or allowing
them to come into contact with your skin
►
Use
PPE designed to prevent and protect against
incidents of this kind.
DESCRIPTION OF THE PRODUCT.
►
The airless gun has been designed for the high
pressure atomization of liquid coating materials
►
Refer this plan to familiarize yourself with the
airless gun before use.
2
5
6
7
4
1
3
1. Tip.
2. Tip guard.
3. Trigger.
4. Trigger guard.
5. Trigger lock.
6. Handle.
7. Material inlet.
USE INSTRUCTIONS .
►
Before putting the airless gun into operation, it
is advisable to read all the indicated instructions
►
Likewise, accident prevention rules, regulations
and guidelines for work centres and current laws and
restrictions must be taken into account
►
The airless
gun must be used only by personnel who have been
trained adequately in their handling, and only for the
uses for which it has been designed.
USING TRIGGER LOCK.
►
Always engage the trigger lock when the airless
gun is not in use (1)
►
To lock the trigger, rotate
the trigger lock until it stops (2)
►
To unlock the
trigger, rotate the trigger lock back (3).
SETUP.
►
Never attempt to assemble, change, or clean
the airless gun, tip or tip guard without first
relieving pressure from the spray system
►
Follow
the pressure relief procedure in the sprayer’s
owner’s manual
►
Always use a tip safety guard
for added protection against injection
►
Beware
that the guard alone will not prevent injection
►
Never cut off tip guard
►
Always engage
trigger lock when the airless gun is not in use
►
Before servicing equipment, consult owner’s