Wenglor UMF303U035, Руководство по эксплуатации

Страница: 3 / 23

3 Reflex Sensor with Analog Output
1. Proper Use
This wenglor product has to be used according to the following functional principle:
Ultrasonic reflex sensors with analog output can be adjusted using Teach-In, or externally via the IO-Link
interface. Sensors of the type M30×1.5 also feature a four digit 7-segment display.
If several UMF reflex sensors are in operation in the immediate vicinity, you can choose between synchronous
and multiplex mode. In synchronous mode, all synchronized sensors send out ultrasound pulses
simultaneously. As a result, object detection is possible over a wider area.
In multiplex mode, the sensors send their ultrasonic pulses alternately, so that sensors which are mounted
side by side do not interact with each other.
2. Safety Precautions
• This operating instruction is part of the product and must be kept during its entire service life.
• Read this operating instruction carefully before using the product.
• Installation, start-up and maintenance of this product has only to be carried out by trained personnel.
• Tampering with or modifying the product is not permissible.
• Protect the product against contamination during start-up.
• Not a safety component in accordance with the EU Machinery Directive.
3. EU Declaration of Conformity
The EU d eclaration of conformity can be found on our website at www.wenglor.com in download area.
RoHS