Wenglor UMF303U035, Руководство по эксплуатации

Страница: 15 / 23

15 Reflex Sensor with Analog Output
7.5 PL (Change Teach-In Mode)
Setting Description
U Foreground Teach-In
The Switching Distance to an object is
teached. If the object is located within
the teached distance, or closer to the
Sensor, the Sensor is switched.
F Window Teach-In
The sensor works by means of two
switching points. If the object is locat-
ed within the window (between SP 1
and SP 2), the Sensor is switched. If
the object is located outside the win-
dow, the Sensor isn't switched.
7.6 SL (Change Switching Logic)
Configuration Description
no NO
The Sensor is switched to ON, if the teached-in object is detected. If the
teached-in object is not detected, the Sensor is switched to OFF.
nc NC
The Sensor is switched to OFF, if the teached-in object is detected. If the
teached-in object is not detected, the Sensor is switched to ON.
7.7 OUP (Set Output function)
Configuration Description
S Switching Output
The sensor output switches depending on the set switching logics
(see Chapter 7.6)
F Error Output
The Output of the Sensor switches in case of an error
(view Chapter 5.1).