4
EN
1. Use for Intended Purpose
This wenglor product is intended for use in accordance with the following functional principle:
High-Performance Distance Sensors
This product group includes high-performance sensors for measuring distance, which function in accordance
with various principles in scanning mode operation. High-Performance Distance Sensors are especially fast or
accurate, or have large working ranges. They’re extremely well suited for demanding applications. Even black
and glossy objects can be reliably detected. Ethernet technology is integrated into selected sensors.
2. Safety Precautions
2.1. Safety Precautions
• These instructions are an integral part of the product and must be kept on hand for the entire duration of
its service life.
• Read the operating instructions carefully before using the product.
• Installation, initial start-up and maintenance of the product may only be carried out by qualified personnel.
• Tampering with or modifying the product is impermissible.
• Protect the product from contamination during initial start-up.
• Not a safety component in accordance with the EU machinery directive
2.2. Laser/LED Warnings
Laser Class 2 (EN 60825-1)
Applicable standards and safety regulations must be observed.
The accompanying laser warnings must be attached.
Do not look into the laser beam.
Caution:
Use of control and/or adjusting devices other than those specified here, as well as the execution of
other procedures, may result in hazardous exposure to laser radiation.
LASER RADIATION
DO NOT STARE INTO BEAM
Complies with 21 CFR
1040.10 and 1040.11 except
for deviations pursuant to Laser
Notice No. 50, July 2001
CLASS 2 LASER PRODUCT
CAUTION
LASER RADIATION -
DO NOT STARE INTO BEAM
CAUTION
Conforme aux règlements
21CFR 1040.10 et 1040.11
sauf pour les dérogations selon
l'avis sur les dispositifs
laser n° 50, juillet 2001
CLASS 2 LASER PRODUCT
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
EN60825-1: 2007
Po<1mW,
λ
= 620-690 nm
LASERSTRAHLUNG
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
EN60825-1: 2007
Po<1mW,
λ
=620 – 690nm
Laser Class 2
EN60825-1
