13
Retro-Reflex Sensor
5.1.2 Lateral Reflector Inclination
Z90R007 through Z90R009 reflectors, which are laid out for the P1ELxxx, are inclined 2° due to their format
and can be mounted without lateral tilting.
The reflectors listed in section 3.1, “Switching Distance”, are not inclined and must therefore be mounted at
an inclined angle of 2° (±0.5°). The direction in which the reflector is tilted depends on the installation situa-
tion and must correspond exactly to the illustration.
Insulation situation 1
Insulation situation 2
