16
Settings
6. Settings
Object Detection Directly in Front of the Background or Underlying Surface
• Adjust and securely mount the sensor in accordance with the installation instructions making sure that the
object lies within the beam emitted by the sensor.
• Remove the object and slowly turn the potentiometer back down until the sensor is deactivated. The back-
ground or the underlying surface is now suppressed.
• Place the object back into the beam emitted by the sensor and check to determine whether or not the sen-
sor is activated again.
Detection of Objects Without Interfering Background
• Adjust and securely mount the sensor in accordance with the installation instructions making sure that the
object lies within the beam emitted by the sensor.
• Turn the potentiometer down until the sensor is deactivated and then turn it back up until the sensor is
once again activated – if necessary turn it up a bit more in order to enhance switching reliability.
