Wenglor OPT2001, Руководство по эксплуатации

Страница: 10 / 13

10
EN
Set Input
The Input can be used as follows: Emitted Light can be switched off at 24 V (La) or Emitted Light can be
switched off at 0 V (La).
• Rotary Selector Switch Ý
to RxD/La Mode
è The
U-LED
and I-
LED
indicate the current configuration.
RxD
is preset in the delivery status. By pressing
the Plus or the Minus key, the configuration can be changed.
Delivery Status

La
U-LED: ON
I-LED: OFF U-LED: OFF
I-LED: ON
La

 
 = Minus Button / LED
 = Plus Button / LED
La = Emitted Light can be switched off at 24 V
La
= Emitted Light can be switched off at 0 V
• Set the rotary selector switch
Ý
to RUN
Adjustment of the Output
Configuring the analog output as a voltage output:
• Set the rotary selector switch
Ý
to U / I MODE
è
The red F-LED lights up
è
If the yellow U-LED lights up: Analog output presently set to 0...10 V
è
If the yellow I-LED lights up: Analog output presently set to 4...20 mA
• Briefly press the plus-key 
è The Yellow
U-LED
lights up: Analog output reconfigured to 0...10 V (voltage output)
• Set the rotary selector switch
Ý
to RUN
Configuring the analog output as a current output:
• Set the rotary selector switch
Ý
to U / I MODE
è
The red F-LED lights up
è
If the yellow U-LED lights up: Analog output presently set to 0...10 V
è
If the yellow I-LED lights up: Analog output presently set to 4...20 mA
• Briefly press the minus-key 
è The yellow I-LED lights up: Analog output reconfigured to 4...20 mA (current output)
• Set the rotary selector switch
Ý
to RUN
Operate the sensor with high resolution (Resolution-Mode)
• Set the rotary selector switch
Ý
to RES. / SPEED-MODE
è
The red F-LED lights up
è
The yellow U-LED lights up: Sensor presently set to high speed
è
The yellow I-LED lights up: Sensor presently set to high resolution
• Briefly press the minus-key 
The yellow I-LED lights up: Sensor now operates with high resolution.
• Set the rotary selector switch
Ý
to RUN